The Remote Control Features and Functions
Switch remote on by pushing the small black control on the left hand side of the
remote the display will show as seen in Fig 4.
Mode or programme settings
There are four modes or treatments settings available M1, M2, M3, and M4. By
pressing the M button on your remote will change the mode from M1 through to
1
M4 (an explanation of the choice of modes is under section ???)
Pressing the C button changes the display from 1,2 or 3 for example
This setting would indicate the remote is set for m mode/programme 1 and TENS
module 1.
Intensity Controls
INSTRUCTIONS FOR USE
Pressing the + or - buttons will increase and decrease the intensity level and is
displayed as shown.
Please note you can only increased and decreased the intensity once you have
turned on your TENS module you are now ready to use your TENS device.
Please follow these simple steps for your first TENS treatment.
Telephone: 0800 121 4626
Battery charge condition
C1 = TENS Module
Intensity level
www.thetenscompany.co.uk