Maintenance; Chain Adjustment; Shear Bolts - Landoll D5P Series Operator's Manual

4-5 MAINTENANCE

WARNING
DO NOT CLEAN, ADJUST OR SERVICE
WHEN MACHINE IS IN MOTION.
WARNING
ALL HYDRAULICALLY OR MECHANI-
CALLY ELEVATED COMPONENTS
MUST BE BLOCKED TO PREVENT AC-
CIDENTAL LOWERING OR MUST BE
LOWERED TO THE GROUND WHEN
ADJUSTMENTS OR REPAIRS ARE
MADE.

4-6 CHAIN ADJUSTMENT

4-6.1 The chain adjusting bolt is located on the
right hand side of main frame.
"finger tight" in order to remove excess chain
slack. Do not over tighten.

4-7 SHEAR BOLTS

4-7.1 The Power Ditcher has two 3/8" x 2-1/2"
grade 8 shear bolts secured with locknuts.
They are located in the flange of the main
drive shaft at the PTO.
4-8
BEFORE WORKING ON THIS MA-
CHINE, DISENGAGE TRACTOR P.T.O.,
SHUT OFF TRACTOR AND ALLOW ALL
MOVING PARTS TO COME TO A COM-
PLETE STOP.
REPLACE ALL SHIELDS AND GUARDS
AFTER SERVICING AND BEFORE
STARTING MACHINE. ALWAYS KEEP
ALL SAFETY SHIELDS IN PLACE
WHEN OPERATING MACHINE.
4-6.2
Tighten to
WARNING
WARNING
Secure by tightening jam nut.