Table of Contents
Advertisement
SPECIFICATIONS
Motor Horsepower:
Power Requirements:
Power Cord:
Hydraulic Fluid Type:
Hydraulic Cylinder Bore:
Hydraulic Cylinder Stroke:
Maximum Material Capability:
Maximum Recommended Bend Angle: 90° for 120° Dies and 180° for 240° Dies (Dies NOT INCLUDED)
SAFETY INFORMATION
The following explanations are displayed in this manual, on the labeling, and on all other information provided with this product:
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE is used to address practices not related to personal injury.
GENERAL SAFETY RULES
Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
To order parts and supplies: 800.343.9353 >> eastwood.com
1
120 VAC, 60Hz, 11.5Amps
8' long [2.4m], 16 Ga., Grounded
10W Hydraulic Fluid
63mm
12" [0.3m]
2" O.D. x 0.120" Wall Mild Steel, Aluminum and Copper
(Stainless, Chromoly and other harder materials may be limited to 2" O.D. x 0.090" Wall)
3
Advertisement
Table of Contents
