Table of Contents
Advertisement
The EASTWOOD HYDRAULIC TUBING BENDER is a high quality, precision tool capable of creating accurate, smooth, kink-free bends, up to 180° in aluminum,
steel, stainless steel and copper tubing, in sizes ranging from 3/4" to 2" with available Eastwood Die Sets. Build roll bars, shop fixtures, go-kart frames and
much more with high accuracy and professional results.
CONTENTS
(1) Frame and Bender
Assembly [A]
(2) Swivel Casters [B]
(2) Fixed Casters [C]
(1) Degree Plate [D]
(18) M8 x1.25 Bolts [E]
(18) M8 Lock washers [F]
(1) Flexible Pointer [G]
(1) 2" Long x Ø 7/8" U-Strap Pin [H]
(1) 3" Long x Ø 7/8" U-Strap Pin [J]
(1) 4.25" Long x Ø 7/8" Die Drive Pin [K]
(1) 5.35" Long x Ø 7/8" Follow Block Pin [L]
(1) 5.5" Long x Ø 1" Pivot Pin [M] (installed)
2
The following parts are included as a convenience should the
Hydraulic Cylinder require future rebuilding.
Hydraulic Cylinders require specialized tools, equipment and
techniques for repair.
The installed Cylinder MUST be professionally rebuilt at a local
hydraulic component repair facility. DO NOT attempt self-repair.
(2) 30mm I.D. x 40mm O.D. Replacement Hydraulic Cylinder Seals [N]
(2) 20mm I.D. x 30mm O.D. Replacement Hydraulic Cylinder Seals [P]
(1) 55mm O.D. x 3.00mm Replacement O-Ring Seal [R]
(1) 24mm O.D. x 3.25mm Replacement O-Ring Seal [S]
A
F
E
L
K
J
H
Eastwood Technical Assistance: 800.343.9353 >> tech@eastwood.com
B
C
G
N
P
R
S
D
Advertisement
Table of Contents
