AudioCodes Mediant 1000B Configuration Note page 45
And avaya aura messaging with nortel cs1000 using t1 qsig
Hide thumbs
Also See for Mediant 1000B:
- User manual (1281 pages) ,
- Hardware installation manual (92 pages) ,
- Quick setup manual (8 pages)
Table of Contents
Advertisement
Configuration Note
A. AudioCodes ini File
FORMAT EtherGroupTable_Index = EtherGroupTable_Group,
EtherGroupTable_Mode, EtherGroupTable_Member1,
EtherGroupTable_Member2;
EtherGroupTable 0 = "GROUP_1", 1, "GE_0_1", "";
EtherGroupTable 1 = "GROUP_2", 0, "", "";
[ \EtherGroupTable ]
[ DeviceTable ]
FORMAT DeviceTable_Index = DeviceTable_VlanID,
DeviceTable_UnderlyingInterface, DeviceTable_DeviceName;
DeviceTable 0 = 1, "GROUP_1", "vlan 1";
[ \DeviceTable ]
[ InterfaceTable ]
FORMAT InterfaceTable_Index = InterfaceTable_ApplicationTypes,
InterfaceTable_InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName,
InterfaceTable_PrimaryDNSServerIPAddress,
InterfaceTable_SecondaryDNSServerIPAddress,
InterfaceTable_UnderlyingDevice;
InterfaceTable 0 = 6, 10, 130.5.175.60, 24, 130.5.175.3, 1,
"O+M+C", 135.200.124.232, 135.201.95.232, "vlan 1";
[ \InterfaceTable ]
[ DspTemplates ]
;
;
*** TABLE DspTemplates ***
; This table contains hidden elements and will not be exposed.
; This table exists on board and will be saved during restarts.
;
[ \DspTemplates ]
[ CpMediaRealm ]
FORMAT CpMediaRealm_Index = CpMediaRealm_MediaRealmName,
CpMediaRealm_IPv4IF, CpMediaRealm_IPv6IF,
CpMediaRealm_PortRangeStart, CpMediaRealm_MediaSessionLeg,
CpMediaRealm_PortRangeEnd, CpMediaRealm_IsDefault,
CpMediaRealm_QoeProfile, CpMediaRealm_BWProfile;
CpMediaRealm 0 = "DefaultRealm", "O+M+C", "", 6000, 330, 9290, 1,
"", "";
Version 6.8
45
Mediant 1000B
Advertisement
Table of Contents
