Page 2
FORTINET DOCUMENT LIBRARY https://docs.fortinet.com FORTINET VIDEO GUIDE https://video.fortinet.com FORTINET BLOG https://blog.fortinet.com CUSTOMER SERVICE & SUPPORT https://support.fortinet.com FORTINET COOKBOOK https://cookbook.fortinet.com FORTINET TRAINING SERVICES https://www.fortinet.com/training FORTIGUARD CENTER https://www.fortiguard.com END USER LICENSE AGREEMENT https://www.fortinet.com/doc/legal/EULA.pdf FEEDBACK techdocs@fortinet.com Email: May 21, 2019...
Warnings and Cautions Handle the camera carefully Do not abuse the camera. The camera can be damaged by improper handing or storage. Do not disassemble the camera To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. Ask a qualified service person for servicing.
You can also order any of the following mounting accessories for your installation requirements: Wall Mounting Kit (SKU: FCM-MD40-WMT) Junction Box Wall/Ceiling Mounting Kit (SKU: FCM-MD40-JBX) For simple mounting instructions without using the additional accessories, see the FortiCam MD40/50 QuickStart Guide.
Cable Adapter Wall/Ceiling Mounting Use the Cable Adapter Mounting Kit to mount the camera on a hard surface where the cable is routed outside the wall or ceiling. 1. Mount the bracket on the wall or ceiling using two screws (1). 2.
Wall Mounting Kit Use the Wall Mounting Kit to mount the camera on the wall in a hanging position. 1. Loosen screw (4) to remove wall plate. 2. Attach wall plate to wall with provided hardware. 3. Thread the cable (1) thought the bracket and attach to cable from wall. Store connector inside bracket.
Junction Box Wall/Ceiling Mounting Use the Junction Box Mounting Kit to mount the camera on a hard surface where the cable is routed outside the wall or ceiling. It also provides room for storing the Ethernet connector. Its side port is compatible with ½” EMT cable glands.