Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fortinet FortiCam SD20
Summary of Contents for Fortinet FortiCam SD20
- Page 1 FortiCam™ SD20 Mounting Guide...
- Page 2 Fortinet. For absolute clarity, any such warranty will be limited to performance in the same ideal conditions as in Fortinet's internal lab tests. Fortinet disclaims in full any covenants, representations, and guarantees pursuant hereto, whether express or implied.
-
Page 3: Table Of Contents
Table of Contents Warnings and Cautions ................... 4 Package contents .................... 5 Connectors ....................... 6 Camera Dimensions ..................7 Available Accessories ..................8 Ceiling Mount ....................12 Indoor conversion ....................12 Hard ceiling mount....................13 In-ceiling t-bar mount ..................... 15 Ceiling mount with straight tube ................ -
Page 4: Warnings And Cautions
Warnings and Cautions · Handle the camera carefully Do not abuse the camera. The camera can be damaged by improper handing or storage. · Do not disassemble the camera To prevent electric shock, do not remove screws or covers. There are no user serviceable parts inside. -
Page 5: Package Contents
Package contents Before proceeding, check the box for the following items. If any item is missing or is defective, DO NOT install or operate the product. Contact the dealer for assistance. M3 Standard Screw x 1 M3 Security Screw x 1* M5 Standard Screw x 1 M5 Security Screw x 1* Camera Body with... -
Page 6: Connectors
Connectors There are various connectors located on the back of the dome camera. Connecter RJ-45 Connector for Ethernet and PoE connections Alarm I/O Connector Power (AC 24V) Connector (power adaptor not supplied) microSD Card Slot (not in use) Factory Reset Button: Press for at least 20 seconds to reset the system Audio I/O Connector A category 5 ethernet cable is recommended for network connection. -
Page 7: Camera Dimensions
Camera Dimensions... -
Page 8: Available Accessories
Available Accessories You can order any of the following mounting accessories for your installation requirements: Hard Ceiling Mount (SKU: FCM-SD2-HCM) For Hard Ceiling Installation Height: 19.51 mm (0.77 inches); Diameter of the bracket: 103.1 mm (4.06 inches) Weight: 65.0 g (0.14 Ibs) - Page 9 In-Ceiling (T-Bar) Mount (SKU: FCM-SD2-ICT) For In-Ceiling Installation Height: 166.11 mm (6.54 inches); Diameter: 276.0 mm (10.9 inches) Weight: 1.1 kg (2.4 lbs) Standard Pendent Mount (SKU: FCM-SD2-PDT) White; 348.0 x 104.0 x 138.6 mm (13.7 x 4.1 x 5.5 inches); 1.5 kg (3.3 lbs) Diameter: 45.0 mm (1.8 inches) Supplied with M8x12 screw x 1, spring washer-8 x 1, pendent tube washer x 1, rubber washer-8 x 1 and sponge x 2.
- Page 10 Straight Tube (SKU: FCM-SD2-ST25) Iron; Height: 250.0 mm (9.8 inches) Diameter: 50.0 mm (2.0 inches) 1.0 kg (2.2 lbs) Supplied with M8x12 screw x 1, spring washer-8 x 1, pendent tube washer x 1, rubber washer-8 x 1 and waterproof rubber x 1 Corner Standard Mounting Plate (SKU: FCM-SD2-CPM) 222.0 (L) x 204.0 (W) x 117.0 (D) mm (8.7 x 8.0 x 4.6 inches);...
- Page 11 Pole Thin Direct Mounting Plate (SKU: FCM-SD2-TDM) For mounting with Standard Pendant Mount 232.0 (L) x 136.0 (W) x 50.0 (D) mm (9.1 x 5.4 x 2.0 inches) Diameter: 50.0 ~ 200.0 mm (2.0 ~ 7.9 inches); Weight: 0.7 kg (1.5 lbs) Supplied with stainless steel straps x 4, Mx16 screw x 4, washer x 4 and spring washer-8 x Stainless Steel Straps For fixing pole...
-
Page 12: Ceiling Mount
See the following sections for more details. Indoor conversion The FortiCam SD20 camera is designed to be placed outdoors. If you want to install it on indoor ceilings, using the hard-ceiling or in-ceiling mounting, you must modify it using the conversion accessories supplied with those kits. -
Page 13: Hard Ceiling Mount
4. Attach the top of the camera and tighten the three screws. Hard ceiling mount If you have hard ceilings, like concrete, use the hard ceiling mount accessory. Note: You must order the mounting accessories separately from Fortinet. Tools Needed: · Drill · (+,–) Screw driver... - Page 14 To mount the camera on a hard ceiling 1. Mark the positions of the three screw holes on the ceiling using the mount as a guide. 2. Drill a hole in each marked location. 3. Insert the supplied anchors into the drilled holes and then fasten the hard ceiling mount with the three supplied self-tapping screws.
-
Page 15: In-Ceiling T-Bar Mount
In-ceiling t-bar mount If you have a hanging or hollow ceiling, use the hard ceiling mount accessory and the T-bar mount accessory. Note: You must order the mounting accessories separately from Fortinet. Tools Needed: · Jigsaw or knife · (+,–) Screw driver To mount the camera into a ceiling with T-bar 1. - Page 16 3. Install the camera on the T-bar bottom mount. 4. Place the ceiling mounting template sticker on the ceiling and cut the circle part out of the ceiling. 5. Disassemble the wings from the in-ceiling (t-bar) mount by loosening the three screws counterclockwise, as indicated in the picture.
- Page 17 8. When screwing, the wings will approach the ceiling board until it is completely flush with the board. Note: Make sure the wings of the T-Bar Bracket are completely flush with the ceiling board. 9. Place the power cable and Ethernet cable down through the center hole of the t-bar and connect the cable to the camera.
-
Page 18: Ceiling Mount With Straight Tube
12. Fix the trim ring to the t-bar bracket. Ceiling mount with straight tube Tools Needed: · Drill · Screwdriver To mount the dome camera with the straight tube Warning: Make sure the ceiling can support the weight of the dome camera and straight tube. 1. - Page 19 Ceiling mounting: straight tube...
-
Page 20: Wall Mount
Wall Mount The dome camera can be mounted on the wall with the standard pendent mount. Standard pendent mount Follow the steps below to mount the dome camera to the standard pendant mount. Tools Needed: · Drill · Screw driver To mount the dome camera to the pendant mount 1. - Page 21 7. Join the dome camera to the mounting kit with the supplied screw and washers. Wall mounting: pendent mount and mounting kit...
-
Page 22: Corner Mount
Corner Mount The corner mount allows you to attach the camera to the corners of walls to provide maximum surveillance. It is designed to work with the pendent mount available separately. Corner plate Follow the steps below to mount the dome camera to the corner plate. Tools needed: ·... -
Page 23: Pole Mount
Pole Mount The dome camera can be mounted on a pole using the provided pole mounting kit. It is designed to work with the pendent mount available separately. Pole direct mounting Follow the steps below to mount the dome camera to the pole direct mounting plate. Tools needed: ·... - Page 24 Pole direct mounting with standard pendent mount...