Recommended Floor Space Requirements - Canon imageRUNNER ADVANCE C7500 III Series Customer Expectation Document

3.4 Recommended Floor Space Requirements

For the common configuration, it is recommended that there be at least
16' (W) x 9.5' (D) of level floor space.
IMPORTANT
• The imageRUNNER ADVANCE C7500 III Series is created to be modular in
design. Floor space, budget, monthly copy/print volume, and applications
determine which configuration works best.
• If the optional Upright Control Panel-H1 is attached, make sure to add
approximately 39" (990.6 mm) to the width of the machine.
• The Buffer Pass Unit-M1 is required when installing any finishing options.
• The optional 2/3 Hole Puncher Unit-A1 can only be used with the Staple
Finisher-V2 or Booklet Finisher-V2.
• The optional Puncher Unit-BF1 can only be used with the Staple Finisher-X1 or
Booklet Finisher-X1.
• The Document Insertion Unit-Q1 or Document Insertion/Folding Unit-K1 is
required when using the Staple Finisher-V2 or Booklet Finisher-V2.
• The Document Insertion Unit-N1 is required when using the Paper Folding
Unit-J1, Staple Finisher-X1, or Booklet Finisher-X1.
• The Paper Folding Unit-J1 requires either the Staple Finisher-X1 or the Booklet
Finisher-X1.
• Only one finisher unit (Staple Finisher-V2, Booklet Finisher-V2, Staple
Finisher-X1, or Booklet Finisher-X1) can be attached to the machine.
• Only one paper feeding unit (POD Deck Lite-C1, Paper Deck Unit-E1, or
Multi-Drawer Paper Deck-C1) can be attached to the machine.
Version 3 imageRUNNER ADVANCE C7500 III Series Customer Expectations Document
imageRUNNER ADVANCE C7500 III Series Customer Expectations Document
Page 34