Advertisement
Console into the switch
Pakedge MS Series switches have a USB Micro B console port that serves as an out-
of-band management point of switch access. This can be useful when network access
to the switch is not available. A USB console driver installed by your operating system
may be required before you can access the console.
To download and install the console driver:
1 Go to
pkdge.co/consoledriver
2 Follow that page's instructions for downloading and installing the driver.
To console into the switch:
1 Connect the console cable to the console port on the back of the switch, then
connect the other end to your computer.
2 Open your chosen terminal emulator software (PuTTY, Terra Term, or Serial for
MacOS), enter the COM port that your adapter is using, then set the following:
Baud Rate: 115200
Character Size: 8
Parity Code: None
Stop Bits: 1
Flow Control: None
.
8
8
Advertisement
