Advertisement
Advertisement
Table of Contents
Related Manuals for Pakedge SE-8
Summary of Contents for Pakedge SE-8
- Page 1 SE-8, SE-8i 8-port Unmanaged Gigabit Switch QUICK START GUIDE...
-
Page 2: Switch Overview
Switch overview The Pakedge SE-8 and SE-8i are affordable network solutions that deliver high performance and versatility to your home or office networks. These deliver eight ports of gigabit speed and reliability to your basic connected devices and heavy bandwidth applications, including on-demand streaming, video over IP, and IP camera systems. - Page 3 Features Front Power Port No device detected indicator indicators Device detected Blinking Device detected and active Back Ethernet ports Power port...
- Page 4 Mounting to a wall or cabinet 1 Place the template at the desired mounting location, then mark the location of the mounting points. The distance between the centerlines of the two mounting points should be 4 in. (104 mm). 2 Install drywall anchors (not included), if needed, at marked locations, then install the screws into the same locations.
- Page 5 Applications As a primary switch Modem/ Internet RK-1 Router Devices connected to switch SE-8 Switch • Streaming device • IP phone • Desktop PC • IP camera • Printer...
- Page 6 As an edge switch Example: Connect an IP camera system to the SE-8 or SE-8i RK-1 Router SX-24 Managed Switch SE-8 Switch Connected devices • IP camera system • 3 IP cameras • IP phone • NVR...
-
Page 8: Technical Support
Technical Support For technical help: www.pakedge.com/portal support@pakedge.com (650) 385-8703 For non-technical inquires: customerservice@pakedge.com (650) 385-8701 For regulatory information: www.pakedge.com/regulatory 11734 S. Election Road Draper, UT 84020 www.pakedge.com sales@pakedge.com DOC-00291-B 2017-07-21 MS ©2017 Control4. All rights reserved.