Weslo WLEX14820 User Manual page 11

HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted. In order to adjust the
reed switch, the left side shield must be removed (see
HOW TO ADJUST THE RESISTANCE STRAP on
page 10).
38
43
21
With the left side shield removed, locate the Reed
Switch (43). Turn the Crank (21) until the Magnet (38)
49
is aligned with the Reed Switch. Loosen, but do not
remove, the M4 x 16mm Screw (49). Slide the Reed
Switch slightly closer to or away from the Magnet.
Retighten the Screw. Turn the Crank for a moment.
Repeat until the console displays correct feedback.
When the Reed Switch is correctly adjusted, reattach
the left side shield and the left pedal.
11