Assembly - Weslo 831.283160 User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tools, assembly requires a Phillips screwdriver , two adjustable
wrenches , and pliers .
Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below
each drawing refers to the key number of the part, from the PART LIST on page 14. The second number refers
to the quantity needed for assembly. Note: Some small parts may have been pre-attached for shipping. If a
part is not in the parts bag, check to see if it has been pre-attached.
M4 x 5mm M6 Washer M8 Split M8 Washer
M4 x 8mm M4 x 16mm
Screw (65)–2 (61)–8 Washer (42)–5 (14)–4
Screw (64)–2 Screw (49)–4
M8 Nylon M10 Nylon M8 x 15mm Button
M6 Nylon
Locknut (10)–4
Locknut (63)–4 Screw (34)–3
Locknut (33)–4
M6 x 32mm Bolt M6 x 38mm Screw M8 x 48mm Bolt (59)–2
(62)–4
(60)–8
M10 x 65mm Carriage Bolt (30)–4
M8 x 125mm Bolt (57)–2
4