Loop Recording - Vantrue N1 PRO User Manual

or Down button to select date and time value, press OK to confirm
and go to next. When the setup is finished, press Power button
to exit.

4.4 Loop recording

After installing the memory card, by default, the camera immediately
starts loop recording video when it connects to a power source and
turn on. If it doesn't connect to a power source, when you press the
OK button to turn it on, it will not auto start recording, you should press
the OK button to start recording.
While recording, the LED indicator is blinking blue, and a red dot will
flash on the top left of the screen. You can stop/start the recording
by pressing the OK button.
System Setup
- 13 -