Advertisement

ED 100, ED 250
Operating instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ED 100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Dorma ED 100

  • Page 1 ED 100, ED 250 — Operating instructions...
  • Page 2 Depending on the structural conditions, the type of door and Limitation of liability protection, it is not possible to rule out residual risks (e.g. ED 100 und ED 250 may be used only for their intended slight bruising, limited impact and the risk to unsupervised purpose.
  • Page 3 In order to select the function, you must set a combination 3.1 Funktionsbeschreibung of both rocker switches on the internal program switch. The ED 100 and ED 250 are electromechanical automatic swing door drives. They automatically open swing doors once Both switches are set to "0".
  • Page 4 3.6 Low/Full Energy mode "Close door" or by manually moving the door approx. 10-20 The drives ED 100 and ED 250 can be operated in the low cm in the Closed direction. and full energy mode.
  • Page 5 ED 100 and ED 250. Should the accessories not be part of the scope of delivery of DORMA, then DORMA cannot guarantee the compatibility.
  • Page 6 Irrespective of safety aspects, a regular a person trained by DORMA. The door system is then to maintenance makes also sense from an economic point be inspected and maintained, if necessary, at least once of view.
  • Page 7 2004/108/EC Electromagnetic The display flashes or lights permanently and indicates an compatibility error that need to be eliminated by the DORMA Service. The technical documentation is available from the Product The following options are available to reset error messages: Compliance Manager: product.compliance@dorma.com.
  • Page 8 Deutschland GmbH DORMA Platz 1 58256 ENNEPETAL DEUTSCHLAND Tel. +49 2333 793-0 Fax +49 2333 793-4950 www.dormakaba.com...

This manual is also suitable for:

Ed 250

Table of Contents