Design Modification; Additional Copies - Ultra Optics Mini2 Operation And Maintenance Manual

Design Modification

DO NOT use this product in any manner not consistent with the instructions outlined in this
manual!
NEVER alter the design, or perform service that is not consistent with the instructions outlined in
this manual, without the prior written approval of Ultra Optics.
ALWAYS refer to the manual supplied by the component manufacturer for the most accurate
and current information regarding that item and its particular use. Any information in the
component manufacturer's manual shall take precedence over information contained in this
manual.
WARNING!
: Do not turn on or operate this machine until this manual has been
read and understood. If anything is unclear, please call our technical support team
immediately for help at 763.488.6030 or TechnicalSupport@ultraoptics.com.

Additional Copies

Additional copies of this manual are available by contacting Ultra Optics by phone at
763.488.6030, or by visiting our website at www.ultraoptics.com. No part of this document may
be reproduced or copied in any form, or by any means, without the prior written permission of
Ultra Optics.
©2018
Ultra Optics
www.ultraoptics.com page ii