Table of Contents
Advertisement
Introduction
This manual is intended for use by Ultra Optics customers. It is important to read and
understand the information in this manual before installing or operating the system. This
manual is provided by Ultra Optics to its customers as a courtesy and, except as expressly
provided in this manual, ULTRA OPTICS MAKES NO WARRANTIES, EXPRESS OR
IMPLIED, REGARDING THE CONTENTS IN THIS MANUAL. ULTRA OPTICS ASSUMES NO
RESPONSIBILITY FOR ANY OUTCOMES AS A RESULT OF USING THIS MANUAL.
Any information contained in other manuals for equipment supplied by third party manufacturers
(including, but not limited to the PLC, motors, etc.) shall take precedence over information
contained within this manual with respect to that third party equipment.
Thank You
The employee-owners of Ultra Optics wish to thank you for your business. If, after reading this
manual, you are not confident in carrying out any task, please call Ultra Optics' technical service
team at 763.488.6030 between the hours of 7:00 am – 7:00 pm cst, Monday - Friday.
Symbols
Symbols and statements used throughout this manual include:
Text following this symbol needs extra attention.
NOTE: Text like this is extra information that may be helpful to the situation.
CAUTION: Text like this is information to help avoid personal injury and/or property damage.
WARNING!
: Text like this is information to help avoid serious personal injury or
death and/or property damage.
Service
The Mini2 back-side coating unit was designed and manufactured for many years of safe and
dependable operation. In the event service is required, please contact Ultra Optics at:
Ultra Optics
9200 Wyoming Avenue North, Suite 360
Brooklyn Park, MN 55445
www.ultraoptics.com
763.488.6030
www.ultraoptics.com
page i
Hide quick links:
Advertisement
Table of Contents
