Checking The Last Time Adjustment Result; Using The Watch In A Medical Facility Or Aircraft; Using Mobile Link With A Mobile Phone; Getting Ready - Casio 5636 Operation Manual

Checking the Last Time
Adjustment Result
1.
Enter the Calendar Mode.
Navigating Between Modes
l
2.
Press (D).
The second hand will indicate the last time
adjustment operation result. The watch
hands will return to indicating the current
time if you do not perform any operation
for nine or ten seconds.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
Second hand
Note
Even if there was a successful time
●
calibration signal receive operation or
connection with a phone, the second
hand will point to [N(NO)] if you
adjusted the time and/or date setting
manually.
The time calibration signal receive
●
result will not be indicated after the
watch is paired with a phone.
Watch Operation Guide 5636
Using the Watch in a Medical
Facility or Aircraft
When you are in a hospital, on an aircraft, or
in any other location where auto time signal
reception or connection with a phone may
cause problems, enable the watch's Airplane
Mode. To disable the watch's Airplane Mode,
perform the same operation again.
1.
Enter the Calendar Mode.
Navigating Between Modes
l
2.
Press (D).
The second hand will indicate the last
receive result for nine or ten seconds.
3.
Within 10 seconds after you perform the
operation in step 2, loosen the crown and
then pull it out to the first click.
If more than 10 seconds elapse before
●
you pull out the crown after you perform
the operation in step 2, the second hand
will return to indicating seconds. If this
happens, perform step 2 again.
4.
Rotate the crown to enable the Airplane
Mode.
[Y(YES)]: Airplane Mode disabled (Auto
time adjustment enabled)
[N(NO)]: Airplane Mode enabled (Auto
time adjustment disabled)
5.
Push the crown back in and then lock it.
Using Mobile Link
with a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch's other settings.
Note
This function is available only while G-
●
SHOCK Connected is running on the
phone.
This section describes watch and
●
phone operations.
: Watch operation
X
: Phone operation
Y

Getting Ready

To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
Install the required app on your
● A
phone.
In Google Play or the App Store, search for the
CASIO "G-SHOCK Connected" app and
install it on your phone.
Configure Bluetooth settings.
●
B
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
Pair the watch with a phone.
●
C
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2. Y
Tap the "G-SHOCK Connected" icon.
If your phone is already paired with a
●
Crown
watch, tap
connecting with a new watch, and then
tap this watch's name.
, tap the item for
10