Before Getting
Started...
This section provides an overview of the watch
and introduces convenient ways it can be
used.
Note
The illustrations included in this
●
operation guide have been created to
facilitate explanation. An illustration
may differ somewhat from the item it
represents.
Watch Face Items
①
②
⑥
⑦
⑧
Summer time setting
A
The mode hand points to the current
summer time setting.
[AL]
B
In the Alarm Mode, the mode hand points
to [AL].
Day of week
C
In the Calendar Mode, the mode hand
points to the day of the week in the Home
City.
[ST]
D
In the Stopwatch Mode, the mode hand
points to [ST].
[TR]
E
In the Timer Mode, the mode hand points
to [TR].
Watch Operation Guide 5636
Last receive result, phone connection
F
status, Airplane Mode setting
The second hand points to the letter that
indicates the result of the last time
adjustment operation that was performed
by receipt of a time calibration signal when
the watch is not paired with a phone.
[Y(YES)]: Auto time adjustment
successful
[N(NO)]: Auto time adjustment failed
The second hand indicates the
connection status between the watch and
a phone when the watch is paired with a
phone.
[Y(YES)]: The watch is connected to your
phone.
[N(NO)]: The watch is not connected to
your phone.
The second hand indicates if auto time
adjustment (Airplane Mode) is enabled or
disabled.
③
[Y(YES)]: Auto time adjustment enabled
(Airplane Mode disabled)
[N(NO)]: Auto time adjustment disabled
④
(Airplane Model enabled)
⑤
Alarm on/off setting
G
In the Alarm Mode, the second hand
indicates if the alarm is enabled or
disabled.
[ON]: Alarm enabled
[OFF]: Alarm disabled
⑨
[C]
H
When connection with the phone starts,
the second hand will point to [C].
[RC]
I
The second hand points to [RC] while time
calibration signal reception is in progress.
Navigating Between Modes
Press (C) to cycle between modes.
In any mode, hold down (C) for at least one
●
second to enter the Calendar Mode.
Calendar Mode
C
Mode hand
Alarm Mode
Stopwatch Mode
C
Timer Mode
Connecting with a Phone
●
Hold down (D) for at least 0.5 seconds until the
second hand points to [C].
Before connection
After connection
D
C
C
2