Casio 5636 Operation Manual page 22

Phone-Watch Connection
Q1
I can't establish a connection
between the phone and watch.
Have you tried turning your phone off and
then back on again?
Turn the phone off and then back on, and
then tap the "G-SHOCK Connected" icon.
Next, on the watch, hold down (D) for at
least 0.5 seconds until the second hand
points to [C].
Is the watch's Airplane Mode enabled?
Connection with your phone is not
possible while the watch's Airplane Mode
is enabled. To connect with your phone,
disable the Airplane Mode.
Using the Watch in a Medical Facility or
l
Aircraft
Has the watch been re-paired with the
phone?
Delete the pairing information from G-
SHOCK Connected and your phone
(iPhone only), and then re-pair them.
Deleting Pairing Information from G-
l
SHOCK Connected
iPhone Only
l
Deleting the phone's pairing
information
Pair the watch with a phone.
l C
If you are unable to establish a
connection...
After deleting pairing information from the
watch, re-pair it with your phone.
Deleting Pairing Information from the
l
Watch
Pair the watch with a phone.
l C
Changing to a Different
Phone Model
Q1
How do I connect my watch to a
different phone?
Delete the pairing information from your watch
and then pair it with the phone you want to
connect with.
If you purchase another phone
l
Watch Operation Guide 5636
Auto Time Adjustment by
Bluetooth Connection (Time
Adjustment)
Q1
When does the watch adjust its time?
Your watch can connect with a paired phone
to adjust its time setting. Auto time adjustment
is performed at the times described below.
After your phone's time zone or summer
●
time setting is changed
After 24 hours or more have passed since
●
the last time adjustment using Bluetooth
connection
After 24 hours or more have passed since
●
city swapping using G-SHOCK Connected
or watch operation
After 24 hours or more have passed since
●
the last home city change or time
adjustment using watch operation
Q2
Auto time setting is not correct.
Is there a Bluetooth connection between
the watch and your phone?
To preserve battery power, the watch will
automatically terminate Bluetooth
connection with your phone temporarily if
it detects the connection has been unused
for approximately one hour. Auto Time
Adjustment is disabled while there is no
connection. To reconnect, press any
watch button.
Have 24 hours or more passed since the
last time adjustment using Bluetooth
connection?
Time adjustment using Bluetooth
connection is performed once every 24
hours. Auto time adjustment will be
performed when 24 hours or more have
elapsed since the last time adjustment
operation.
Have 24 hours or more has passed since
the last manual time adjustment, city
change, or city swapping operation?
Auto time adjustment is not performed for
24 hours after a manual time adjustment,
city change, or city swapping operation.
Auto time adjustment will resume after 24
hours or more have elapsed after either of
the above operations is performed.
Is the watch's Airplane Mode enabled?
Connection with your phone is not
possible while the watch's Airplane Mode
is enabled. To connect with your phone,
disable the Airplane Mode.
Using the Watch in a Medical Facility or
l
Aircraft
Q3
Even if I hold down (D) for at least 0.5
seconds, the watch does not sync its
time setting with my phone.
Connection with your phone is not possible
while the watch's Airplane Mode is enabled.
To connect with your phone, disable the
Airplane Mode.
Using the Watch in a Medical Facility or
l
Aircraft
Q4
Time is not displayed correctly.
If your phone is unable to receive a signal
because you are outside its service range or
for some other reason, the watch may not be
able to display the correct time. If this
happens, connect the phone to its network
and then adjust the time setting.
Q5
Time signal reception is not
performed while watch is connected
with a phone.
The watch does not receive a time signal for
time correction while it is connected with a
phone. However, time signal auto receive is
performed if there has been no auto time
adjustment based on connection between the
watch and phone for more than one day.
Alarm
Q1
The alarm does not sound.
Is the watch's battery charged?
Keep the watch exposed to light until it
recharges sufficiently.
Solar Charging
l
The crown is pulled out.
The alarm will not sound while the crown
is pulled out. Push the crown back in to its
normal position.
Is the alarm enabled?
Enable the alarm.
Configuring Alarm Settings
l
Hand Movement and
Indications
Q1
I don't know what mode the watch is
in.
You can determine the current mode by
checking the mode hand position. Use (C) to
navigate between modes.
Navigating Between Modes
l
22