Table of Contents
Advertisement
Rosemount 356
Rosemount Nuclear Warranty and Limitations of
Remedy
The warranty and limitations of remedy applicable to this Rosemount equipment are as stated on the
reverse side of the current Rosemount quotation and customer acknowledgment forms.
Authorization for return is required from Rosemount Nuclear prior to shipment. Contact Rosemount Nuclear
(1-952-949-5200) for details on obtaining Return Material Authorization (RMA). Rosemount Nuclear
Instruments will not accept any returned material without a Return Material Authorization. Material
returned without authorization is subject to return to customer.
Material returned for repair, whether in or out of warranty, should be shipped prepaid to:
Rosemount Nuclear
8200 Market Boulevard
Chanhassen, MN 55317
USA
Rosemount 356 Nuclear Connector has been tested for Nuclear Class 1E usage according to the standards
shown below:
•
KTA 3505-2005
Rosemount 356 Connectors are manufactured under a quality system that meets the requirements of ISO
9001, KTA 1401, KTA 3507 and the applicable portions of IAEA-50-C-Q. During qualification testing,
interfaces were defined between transmitter/connector and the surrounding environment that are essential to
meeting requirements of the qualification standards listed above.
In order to maintain the qualified status of the transmitter/connector system, the essential environmental
interfaces must not be compromised. Performance of any operations on the connector other than those
specifically authorized in this manual has the potential for compromising an essential environmental interface.
Where the manual uses the terms requirement, mandatory, must or required, the instructions so
referenced must be carefully followed. Rosemount Nuclear expressly disclaims all responsibility and
liability for connectors for which the foregoing has not been complied with by the user.
iv
RETURN OF MATERIAL
IMPORTANT
Reference Manual
00809-0100-4856 Rev AE
February 2020
Title Page
Advertisement
Table of Contents
