Overview; Safety Messages; General Considerations; Mechanical Considerations - Emerson Rosemount 356 Reference Manual

Reference Manual
00809-0100-4856 Rev AE
February 2020
SECTION 3:

OVERVIEW

SAFETY MESSAGES

Warnings
GENERAL
CONSIDERATIONS
MECHANICAL
CONSIDERATIONS
INSTALLATION OF FIELD SIDE ONTO
INSTRUMENT SIDE
Overview ...................................................................................... page 3-1
Safety Messages ......................................................................... page 3-1
General Considerations ............................................................. page 3-1
Mechanical Considerations ....................................................... page 3-1
Installation Procedure ................................................................ page 3-4
This section contains the following installation considerations:
•

General Considerations

•

Mechanical Considerations

•
Installation Procedure
Procedures and instructions in this section may require special
precautions to ensure the safety of the personnel performing the
operation. Refer to the following safety messages before performing
an operation preceded by this symbol.
Electrical shock can result in death or injury.
•
Avoid contact with the connector leads and device terminals
Field Side Instrumentation cable should be supported within
approximately 1 foot of the device/connector to prevent undue strain
on field side connector.
The Rosemount 356 uses a simple clamp-style disconnect
mechanism between the instrument and field sides of the connector.
While the general use of this type of connection is simple, this
section should be read carefully before installation to ensure the
qualified configuration requirements are met.
This section contains information you should consider when
preparing to install the field side of the connector onto the instrument
side. Read this section carefully before proceeding to installation
procedure. Proper installation is mandatory to assure qualification.
Ensure the provided protective covers remain in place throughout
installation to provide protection from dust, moisture and other
foreign materials (see Figure 3-1). Once the field side is connected
to the instrument side, the covers may be discarded.
Rosemount 356
WARNING
WARNING