Page 1
Barking detection sensitivity back in place, take care to insert adjustment screw Polarity « + » of the first the little pin at the bottom of battery downward the battery cover IKI Voice technical support www.numaxes.com maj 07/2020 - 1/5...
Page 2
When leaving the factory, detection sensitivity is set on the maximum position (maximum sensitivity). To adapt the barking detection to the barking strength of your dog, you should proceed as follows: − Remove the 2 screws from the battery cover. IKI Voice technical support www.numaxes.com maj 07/2020 - 2/5...
Page 3
− Move the magnetic key away from the collar as soon as you have reached the desired mode. − The collar will memorize the selected mode. Next time you will switch on the collar, it will be in the mode you selected last. IKI Voice technical support www.numaxes.com maj 07/2020 - 3/5...
Page 4
− Do not use volatile liquids such as solvent or benzene to clean the product. Use a soft cloth slightly moistened with water or a neutral detergent. − The strap can be washed with soapy water. IKI Voice technical support www.numaxes.com maj 07/2020 - 4/5...
Page 5
45161 OLIVET CEDEX FRANCE Monday - Friday: 9h-12h / 14h-17h Phone +33 (0)2 38 69 96 27 Fax +33 (0)2 38 63 31 00 You can also contact us at export@numaxes.com IKI Voice technical support www.numaxes.com maj 07/2020 - 5/5...
Need help?
Do you have a question about the IKI Voice and is the answer not in the manual?
Questions and answers