Other Useful Information - Click FT-40MD User Manual

Other Useful Information

• Before cleaning, maintenance or moving the fan, and before
removing a front or rear guard, switch off the fan and unplug it from
the wall outlet.
• Do not immerse the fan in water or other liquids. Do not spray it
with liquids. Do not allow water to drip on or into the fan motor
housing.
• Never use petrol, solvents, harsh detergents, or abrasive or alkaline
cleaners on the fan.
Cleaning and maintenance
• Dusting: Clean your fan periodically by lightly running a vacuum
cleaner nozzle (soft brush) over the front and rear guards to remove
any dust or dirt that may have accumulated inside or on the unit.
Alternatively, use a soft, dry cloth for dusting.
• Stubborn stains: Use a slightly damp, soapy cloth for stubborn stains
but be sure the cloth is not too wet. Use caution around the motor
housing. Do not allow the motor or other electrical components to be
exposed to water.
• End of season cleaning: When you have finished using the fan at the
end of the season, wipe off any dust to maintain it in good working
order for the next season. To clean the blades, carefully remove the front
grille: loosen the screws around the rim of the front grille and take off
the grille. Carefully wipe the blades clean using a dry or slightly damp
cloth and a little mild detergent, then wipe dry. Ensure all parts are
thoroughly dry before reassembly.
• Storage: In the off season, store the clean and dry fan in a safe, dry
location, protected from dust. We recommend using the original
carton for storage of the disassembled product (follow the assembly
instructions in reverse order to disassemble). Alternatively, place a large
plastic bag or piece of material over the top of the cleaned fan for dust
protection.
12
AFTER SALES SUPPORT
(AU) 1300 886 649 (NZ) 0800 836 761 |
WARNING!
info@tempo.org