Epson WF-C20600 User Manual page 253

Setting Options
Distinctive Ring All
Single
Double
Triple
Double&Triple
Rings to Answer 1 to 9
Remote Receive Off
On
Start Code
Rejection Fax Various
Receiving Paper Size Various
Save/Forward File PDF
Format
TIFF
Parent topic: Selecting Advanced Fax Settings
Related tasks
Selecting the Date and Time
Starting a Scan Using the Product Control Panel
Description
If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
or more phone numbers to the same line and assign
different ring patterns to each. If you use this service,
select the number of rings for your fax number so
your product can receive faxes on the correct
number of rings. Select All for phones lines that do
not use this service.
Sets the number of rings before your product
receives a fax. If Receive Mode is set to Auto and an
answering machine is connected to the product,
make sure this setting is set higher than the number
of rings your answering machine is set to answer a
call.
Lets you start receiving faxes using your phone
instead of operating the product (if the Receive Mode
is set to Auto). When you select On, you must also
set a Start Code. If you are using a cordless handset
with its base connected to the product, you can start
receiving the fax by entering the code using the
handset.
Lets you automatically reject faxes from blocked
numbers, with blank headers, or from unrecognized
contacts.
Selects the paper size for incoming faxes.
Saves or forwards a fax as a PDF file. You can also
set a password for opening the PDF or allowing
printing and editing permissions.
Saves or forwards a fax as a TIFF file.
253