Advertisement
Observer 70
Installation switch S1 ( 10) can be used to switch Automatic mode on and off. Installation switch
S2 can be used to switch Manual mode on and off.
o
Lock the housing cover into the bottom of the rear housing panel, push the top down and
screw it tight with the central screw (3).
6 Appendix
6.1 Technical data
Rated voltage
Mains frequency
Power consumption
Ambient temperature
Protection rating
Circuit breaker
Installation height
Detection angle
run-on time
Connected load
Incandescent lamps
HV halogen lamps
Tronic transformers
Inductive transformers
Electronic ballast
Fluorescent lamps, uncompensated
Fluorescent lamps, parallel compensated
Switching current
Minimum switching current AC
Contact type
Connection
Single stranded
6.2 Warranty
The warranty is provided in accordance with statutory requirements via the specialist trade.
Please submit or send faulty devices postage paid together with an error description to your
responsible salesperson (specialist trade/installation company/electrical specialist trade). They
will forward the devices to the Gira Service Center.
82523522
10: Connection diagram, Automatic manual mode
19.05.2011
AC 230 V ~
50 Hz
approx. 1.1 W
-25 ... +55 °C
IP 55
max. 10 A
approx. 2.40 m
approx. 70 °
approx. 10 s ... 5 min
1000 W
1000 W
750 W
750 VA
Type-dependent
500 VA
400 VA
100 mA
µ contact
max. 2.5 mm²
7/8
Advertisement
