Dometic DM50NTE Installation And Operating Manual page 17

DM50NTE
• Air passing through the inlet air duct must not be heated by any heat sources
(heaters, direct sunlight, gas ovens etc.).
6.2 Pressing out the ventilation opening
fig. 8, page 7
➤ Produce a ventilation opening of 75 x 550 mm in the bottom of the furniture into
which you place the minibar.
Measure the distance of 504 mm from the minibar's door front excluding any
own decor.
6.3 Mounting the minibar into a piece of furniture
No in
fig. 9, page 7
1
2
➤ Fasten the minibar with the four screws ø4 x 45 mm (fig. 9 1, page 7).
➤ Insert the four plugs (fig. 9 2, page 7) into the boring.
6.4 Connecting the minibar electrically
➤ Plug the 230 V connection cable into the AC voltage socket and connect it to the
230 V AC mains supply.
✓ The Power Status LED lights up.
✓ The lamp lights up and the minibar starts cooling the interior.
6.5 Mounting hotel's own door decor (DM50NTE F only)
The hotel's own door decor has to comply with the following requirements:
• Maximum weight: 2 kg
• Maximum thickness: 14 mm
➤ Fasten the decor with four screws.
EN
Description
Screw ø4 x 45 mm
Plug
Installation
17