Pair To Mobile Device - Plantronics Voyager 4210 Office User Manual

Pair to mobile device

To put your headset in pair mode, slide and hold the Power
1
until you hear "pairing" and the headset LEDs flash red and blue.
Select "PLT V4210 Series / PLT V4220 Series."
2
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear "pairing successful" and the headset LEDs stop flashing.
NOTE
Your headset can pair with up to 8 devices but only maintain 2 connections simultaneously;
this includes the Bluetooth USB adapter.
switch away from the off position
6