System Basics; How To; Adjust Volume - Plantronics Voyager 4210 Office User Manual

System basics

How to

Adjust volume

Make a call
Tap the Audio button on the base.
1
Manually remove the handset if you don't have an HL10 lifter or EHS cable. You should hear a dial
2
tone.
TIP
If you do not hear a dial tone, turn over the base and adjust the switch (A--G). "A" works for the
majority of desk phones.
Dial from your desk phone.
3
End/take a call
To answer or end a call, tap the Audio button
• Headset volume Fine-tune your headset volume by adjusting the volume controls.
• Desk phone volume When you are on a desk phone call and your voice is too quiet/loud, adjust
the microphone volume on the bottom of the base. If your caller's voice is too loud/quiet on a
desk phone call, adjust the base volume dial.
• Base ringtone volume Adjust the base ringtone volume on the bottom of the base. This ringtone
alerts you if you are not wearing your headset and a call comes in. There are 4 base ringer
settings: off, low, medium and high.
Adjust headset microphone volume (softphone)
Place a test softphone call and adjust softphone volume and PC sound volume accordingly.
on the base or tap the headset call button.
9