Weider WESY37530 User Manual page 8

6. Press a 50mm x 75mm Inner Cap (45) into the
Right Seat Frame (3).
Orient the Right Seat Frame (3) as shown. Attach
the Right Seat Frame to the Right Leg (7) with
two M10 x 78mm Bolts (86), two M10 Washers
(74), and two M10 Nylon Locknuts (75). Do not
tighten the Locknuts yet.
Attach the Right Seat Frame (3) to the Right
Upright (5) with two M10 x 78mm Bolts (86), two
M10 Washers (74), and two M10 Nylon Locknuts
(75). Do not tighten the Locknuts yet.
7. Press a Square Bushing (55) into the Left Leg
(8).
Attach a Leg Bumper (49) to the Left Leg (8) with
an M4 x 25mm Self-tapping Screw (77) and an
M4 Washer (84).
Attach the Left Leg (8) to the Left Base (2) with
the indicated two M10 x 53mm Carriage Bolts
(83) and two M10 Nylon Locknuts (75). Do not
tighten the Locknuts yet.
8. Orient the Left Seat Frame (4) as shown. Make
sure the brackets are closer to the Left Leg
(8). Attach the Left Seat Frame to the Left Leg
with two M10 x 78mm Bolts (86), two M10
Washers (74), and two M10 Nylon Locknuts (75).
Do not tighten the Locknuts yet.
Attach the Left Seat Frame (4) to the Left Upright
(6) with two M10 x 78mm Bolts (86), two M10
Washers (74), and two M10 Nylon Locknuts (75).
Do not tighten the Locknuts yet.
6
3
86
86
74
7
75
74
7
8
75
83
8
75 74
86
74
6
8
86
74
86
5
45
55
49
84
77
75
2
86
4
86
Bracket 86
74
8
74
75
74
75