5. Slider Installation Check
Check that the rib section of the slider holding plate fits smoothly into the space between the scale unit and
slider. (Thickness of the rib section of the slider holding plate: 1 mm (0.039"))
Slider holding plate
Rib
The scale and slider were not attached properly if the slider holding plate does not fit or rattles noticeably.
The scale and slider must be attached again from the beginning.
6. Air Injection
The air inlets are located in three locations, at both ends of the scale unit and on the slider.
For details, refer to the Instruction Manual (sold separately).
Union
Outside of suitable tube
5
BL55-RU
(E)