JANE POWERTWIN Instructions Manual page 28

16- MAINTENANCE AND REPAIR
• Always check your pushchair for signs of wear and tear.
Grease the mobile parts.
• Keep the metal parts clean and dry to avoid rust. Regu-
larly lubricate the mobile parts and mechanisms with
WD40 or a silicon-based spray. Do not use grease or oil.
• Regularly check all the rivets and safety devices to check
that they are tight and secure, especially the primary
and secondary lock, which keep the pushchair upright.
Inspect the harness, the wheels and the brakes and re-
place them if necessary.
• Go up and down kerbs carefully. Continual impact may
cause damage to the pushchair. For your safety and the
good conservation of this product, it is important to
bring it to one of our official workshops for regular
inspections.
28
INFORMATION ABOUT THE GUARANTEE
This article comes with a guarantee in accordance with the
provisions of law 23 / 2003 of 10th July. Keep your receipt as
proof of purchase, it is essential to present the receipt in the
shop where you bought the product to confirm validity of the
guarantee in the event of any problems.
This guarantee excludes any defects or breakages caused by
inappropriate use of the article or inobservance of the safety
and maintenance rules listed in the instruction pages and
on the care labels, as well as faults caused by wear and tear
through normal use and daily handling.
The label displaying the chassis number of the model should
never be taken off, it contains important information.
Notice:
For the maximum safety and care of your new JANÉ product,
it is very important that you complete the registration card
found on the web page www.jane.es
This registration means we can inform you, if necessary, of the
evolution and maintenance of your product. Additionally, if
you would like, we can also inform you about new models or
news that we think may be useful for you.