Part Identification Chart - Weider WEBE12621 User Manual

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST in the center of this manual. Note: Some small
parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-
attached.
M10 Washer (6)
M10 Nylon Locknut (11)
M4 x 16mm Screw (71)
M6 x 16mm Screw (30)
M10 x 19mm Bolt (60)
M6 x 38mm Screw (37)
M10 x 47mm Bolt (24)
M8 x 58mm Bolt (38)
M8 Washer (41)
M8 Nylon Locknut (73)
M10 x 58mm Carriage Bolt (32)
M6 Washer (36)
M6 Nylon Locknut (40)
M10 x 86mm Bolt (59)
M10 x 78mm Bolt (67)
M10 x 75mm Bolt (66)
M10 x 72mm Bolt (70)
M10 x 68mm Bolt (31)