Advertisement
Installation (cont.)
1"
Decor Star
4. Using a drill with a tile bit, drill the hole slowly into
the tile. Do not drill into any piping or wiring in the
wall. Insert the anchors into the wall. (NOTE: Before
installing the wall anchors, use a small piece of paint-
ers tape or masking tape over the drill area. This will
prevent damages to the tile)
5. Secure the mounting brackets to the wall.
6. Apply thread sealant tape to the threading on the
shut off valves before connect both hot and cold water
supply hoses to the valves. Turn on the valves and
check all connections for possible leaks.
8
PL-014-SS Rev. A2 122015
Advertisement
