JVC UX-P30 Series Service Manual page 13

3.1.7 Removing the power transformer assembly
(See Fig.14 and 15)
• Prior to performing the following procedure, remove the metal
cover, the rear cover, the CD mechanism assembly and the
rear panel.
(1) Remove the cord stopper upwards on the back of the body.
(2) Disconnect the power cord from connector
board of the power transformer assembly.
(3) Disconnect the wire from connector
board.
(4) Remove the four screws K attaching the power transformer
assembly.
J1000 on the
FW903 on the main
Power transformer
Main board
assembly
Power cord
Fig.14
CN907
Fig.15
J1000
Cord stopper
K
J1000
Power transformer
assembly
K
(No.MB049)1-13