JVC UX-P550 Service Manual

Hide thumbs Also See for UX-P550:

Instructions manual (153 pages)

Service manual (67 pages)

Instructions manual (48 pages)

Table of Contents

Quick Links

Summary of Contents for JVC UX-P550

Page 1: Table Of Contents
SERVICE MANUAL MICRO COMPONENT SYSTEM MB286 2004 UX-P550 Area suffix US ------------------------ Singapore UB ---------------------- Hong Kong UW ----------- Brazil,Mexico,Peru UX -------------------- Saudi Arabia UJ ---------------------- U.S.Military UN ----------------------------- Asean SP-UXP550 CA-UXP550 SP-UXP550 TABLE OF CONTENTS PRECAUTION............... . . 1-3 SPECIFIC SERVICE INSTRUCTIONS .
Page 2 SPECIFICATION HIGH:40 W (20 W + 20 W) at 4 Ω (10% THD) Amplifier section Output Power LOW:40 W (20 W + 20 W) at 4 Ω (10% THD) AUX:400 mV/50 k Ω Audio Input Digital output DVD OPTICAL DIGITAL OUT:-21 dBm to -15 dBm (660 nm ±30 nm) Video output Color system:NTSC/PAL selectable 1 V(p-p)/75 Ω...
Page 3: Precaution
SECTION 1 PRECAUTION Safety Precautions (1) This design of this product contains special hardware and voltmeter. many circuits and components specially for safety purpos- Move the resistor connection to each exposed metal es. For continued protection, no changes should be made part, particularly any exposed metal part having a return to the original design unless authorized in writing by the path to the chassis, and measure the AC voltage across...
Page 4 Preventing static electricity Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged, can destroy the laser diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs. 1.5.1 Grounding to prevent damage by static electricity Static electricity in the work area can destroy the optical pickup (laser diode) in devices such as laser products.
Page 5: Important For Laser Products
Important for laser products 5.CAUTION : If safety switches malfunction, the laser is able 1.CLASS 1 LASER PRODUCT to function. 2.DANGER : Invisible laser radiation when open and inter 6.CAUTION : Use of controls, adjustments or performance of lock failed or defeated. Avoid direct exposure to beam. procedures other than those specified here in may result in 3.CAUTION : There are no serviceable parts inside the hazardous radiation exposure.
Page 6: Specific Service Instructions
SECTION 2 SPECIFIC SERVICE INSTRUCTIONS This service manual does not describe SPECIFIC SERVICE INSTRUCTIONS. 1-6 (No.MB286)
Page 7: Disassembly
SECTION 3 DISASSEMBLY Main body section 3.1.1 Removing the side panels L/R (See Figs.1 to 4) (1) From the back side of the main body, remove the four screws A attaching the side panels L/R to the rear panel. Top cover assembly (See Fig.1.) (2) From the bottom side of the main body, remove the two screws B attaching the side panels L/R to the bottom chas-...
Page 8 3.1.2 Removing the front panel assembly (See Figs.5 to 8) • Prior to performing the following procedures, remove the side panels L/R. (1) From the right side of the main body, push the slide cam and pull the tray out of the main body in the direction of the arrow 1.
Page 9 3.1.3 Removing the top cover assembly (See Figs.9 to 11) • Prior to performing the following procedures, remove the side panels L/R and front panel assembly. Top cover assembly Card wires (1) From the back side of the main body, remove the screw D attaching the top cover assembly to the rear panel.
Page 10 3.1.4 Removing the cassette mechanism assembly (See Fig.12) • Prior to performing the following procedures, remove the side panels L/R, front panel assembly and top cover assembly. Card wires (1) From the bottom side of the top cover assembly, discon- Microphone amplifier board Top cover assembly nect the card wires from the connectors (CN33, CN34) on...
Page 11 3.1.7 Removing the tuner (See Fig.14) • Prior to performing the following procedures, remove the side panels L/R and rear panel. Card wire Disconnect the card wire from the connector on the tuner. Tuner Fig.14 3.1.8 Removing the video board (See Fig.15) •...
Page 12 3.1.10 Removing the main board (See Fig.17) • Prior to performing the following procedures, remove the side panels L/R, front panel assembly, top cover assembly, tuner Wire locater and rear panel. Main board CN710 (1) From the right side of the main body, remove the wire loca- CN210 ter.
Page 13 3.1.12 Removing the power amplifier board (See Fig.19) • Prior to performing the following procedures, remove the side panels L/R, front panel assembly, top cover assembly, rear Power amplifier board panel, tuner, video board, main board and power supply board. Shield case (1) From the top side of the main body, disconnect the card wire from the connector...
Page 14 3.1.14 Removing the DVD mechanism assembly (See Figs.22 and 23) • Prior to performing the following procedures, remove the side panels L/R, front panel assembly, top cover assembly, rear Bottom chassis Shield case panel, tuner, video board, main board and power supply board. (1) From the top side of the main body, remove the four screws S attaching the shield case to the bottom chassis.
Page 15 3.1.15 Removing the power transformer (See Figs.24 and 25) • Prior to performing the following procedures, remove the side panels L/R, front panel assembly, top cover assembly, rear CN102 Power supply board panel, fan and main board. CN103 (1) From the forward side of the power supply board, discon- CN105 nect the wires from the connectors (CN102, CN103, CN105).
Page 16: Front Panel Assembly Fig
3.1.16 Removing the FL board (See Fig.26) • Prior to performing the following procedures, remove the side panels L/R and front panel assembly. FL board (1) From the inside of the front panel assembly, remove the Wire holder three screws V and screw V’ attaching the FL board. CN751 Reference: When attaching the screw V’, attach the wire holder with...
Page 17 3.1.17 Removing the switch board (See Figs.27 and 28) • Prior to performing the following procedures, remove the side panels L/R and front panel assembly. Front panel assembly (1) From the front side of the front panel assembly, pull out the volume knob in to the direction of the arrow.
Page 18: No.mb286)1
3.1.18 Removing the headphone jack board (See Fig.29) Wire holder Wire Spacer • Prior to performing the following procedure, remove the side panels L/R and front panel assembly. (1) From the inside of the front panel assembly, remove the screw X attaching the headphone jack board. (2) Take out the headphone jack board from the front panel as- sembly.
Page 19 DVD mechanism section • Prior to performing the following procedures, remove the DVD mechanism assembly from the main body. (See "3.1.14 Removing the DVD mechanism assembly".) 3.2.1 Removing the tray assembly (See Figs.1 to 3) (1) From the right side of the DVD mechanism assembly, push Tray assembly DVD mechanism assembly the slide cam and pull the tray assembly out of the DVD...
Page 20 3.2.2 Removing the traverse mechanism assembly (See Figs.4) (1) From the bottom side of the DVD mechanism assembly, re- move the three screws B and screw B’ attaching the traverse mechanism assembly and take out the DVD traverse mechanism assembly with the DVD servo board. Washer Reference: When attaching the screw B’, attach the washer with it.
Page 21 3.2.4 Removing the pickup (See Figs.5,7 to 9) • Prior to performing the following procedures, remove the Thrust spring Plate traverse mechanism assembly. (1) From the side of the traverse mechanism assembly, solder the short land sections c on the pickup. (See Fig.5.) (2) Release the lock of the connector on the pickup in the di- rection of the arrow and disconnect the card wire.
Page 22 3.2.5 Attaching the pickup (See Figs.5,7 to 10) • See "3.2.4 Removing the pickup". Feed gear M (1) Attach the shaft, SW actuator and LEAD spring to the pick- up. (See Fig.9.) (2) Align the pickup to the section j of the traverse mechanism assembly first, and set the both ends of the shaft of the pickup in the sections g and i of the traverse mechanism assembly.
Page 23 3.2.7 Removing the spindle motor board (See Figs.11 and 13) • Prior to performing the following procedures, remove the Traverse mechanism assembly traverse mechanism assembly and DVD servo board. (1) From the top side of the traverse mechanism assembly, re- move the wires from the soldered section k on the spindle motor board.
Page 24 Cassette mechanism assembly 3.3.1 Removing the Play/Record & Clear head Cassette mechanism assembly Fly wheelR (See Fig.1~3) (1) While moving the trigger arm on the right side of the head mount in the direction of the arrow, turn the flywheel R counterclockwise until the head mount comes ahead and clicks.
Page 25 3.3.2 Removing the head amplifier & mechanism control board (See Fig.4) (1) Turn over the cassette mechanism assembly and remove Main motor assembly the three screws A attaching the head amplifier & mecha- nism control board. Capstan belt (2) Disconnect the flexible wire from connector CN31 on the head amplifier &...
Page 26 3.3.4 Removing the flywheel (See Fig.8, 9) • Prior to performing the following procedure, remove the head amplifier & mechanism control board and the main motor as- sembly. (1) From the front side of the cassette mechanism, remove the slit washers attaching the capstan shaft L and R. Pull out the flywheels backward.
Page 27 3.3.6 Reattaching the Play/ Record & Clear head (See Fig.11~13) (1) Reattaching the head mount assembly. a) Change front of the direction cover of the head mount assembly to the left (Turn the head forward). b) Fit the bosses O', P', Q', U' and V' on the head mount assembly to the holes P and V, the slots O, U and Q of the mechanism sub assembly (See Fig.11 to 13).
Page 28: Adjustment
SECTION 4 ADJUSTMENT Measurement Instruments Required for Adjustment (1) Low frequency oscillator 4.2.2 Tuner section This oscillator should have a capacity to output 0dBs to FM Band cover 87.5 MHz~108.0 MHz 600Ω at an oscillation frequency of 50Hz-20kHz. AM Band cover 531 kHz~1,710 kHz (at 9kHz step) (2) Attenuator impedance : 600Ω...
Page 29 Cassette mechanism adjustment Head azimuth Head azimuth adjustment screw adjustment screw (Forward side) (Reverse side) CN31 Head azimuth Head azimuth R/P head, Erase head adjustment screw adjustment screw (Forward side) (Reverse side) Mecha control board Motor speed VR37 VR37 R371 FW100 CN33 C374...
Page 30 4.3.1 Mechanism section Adjustment Item Condition Measurement method Ref.value position Only adjust Head Test tape 1. Playback the test tape VT703L (8kHz). Maximum at changed azimuth : VT703L (8kHz) 2. Adjust to maximum output level by azimuth output head Output terminal adjustment screw for forward side and reverse : Speaker out side.
Page 31 4.3.2 Electrical adjustment Adjustment Item Condition Measurement method Ref.value position AC-225 Recording VR31 1. Set the test tape(AC-514 TYPE Forward or Reverse :4.20uA BIAS Test tape AC-225 TYPE ), then make REC/PAUSE AC-514 adjustment :AC-514 TYPE condition. :4.0uA :AC-225 TYPE 2.
Page 32 Special mode 1 1. Cold start Cold start processing. Press the "STANDBY/ON", "ENTER" and "10" keys on the remote controller at standby. FL indication COLD Cold start is completed. 2. Tray lock Loader-mecha is locked. EJECT processing isn't done by pushing EJECT key at tray lock on state. Then display to LOCKED / UNLOCKED.
Page 33 4. DVD test mode Into the DVD test mode. Test mode contents is refer to module spec. DVD test mode is canceled by POWER OFF and except source DVD. Insert the power cord in an outlet while pressing the "DVD/CD" and "RHYTHM AX" keys on the main unit simultaneously.
Page 34 DVD TEST MODE Insert the power cord in an outlet while pressing the "DVD/CD" and "RHYTHM AX" keys on the main unit simultaneously. T xxy vw FL indication T xxy vw The initialization state from DVD-MICON "3" : FULL initialization end "0"...
Page 35 Press the "MENU" key on the remote controller. Enter to CHECK MODE FL indication FL indication Press the "1" key on the remote controller. CHECK PLAYBACK Starting of PLAYBACK FL indication Press the "2" key on the remote controller. WOBBLE Performing of SEARCH TNO+1 (2 seconds) FL indication...
Page 36 FL indication Press the "7" key on the remote controller. EEP BWD Confirming the EEPROM (MECHA) content (2 seconds) in -1 address step FL indication cccc j j j j FL indication Press the "8" key on the remote controller. EEP FWD Confirming the EEPROM (MECHA) content (2 seconds)
Page 37 FL indication Press the "PLAY" key on the remote controller. LSR JIT Confirming LASER CURRENT and JITTER value (2 seconds) FL indication cccc j j j j Press the "STOP" key on the remote FL indication controller. cccc j j j j Stopping the JITTER measurement Press the "MENU"...
Page 38: Troubleshooting
SECTION 5 TROUBLESHOOTING This service manual does not describe TROUBLESHOOTING. 1-38 (No.MB286)
Page 39 (No.MB286)1-39...
Page 40 Victor Company of Japan, Limited AV & MULTIMEDIA COMPANY AUDIO/VIDEO SYSTEMS CATEGORY 10-1,1chome,Ohwatari-machi,Maebashi-city,371-8543,Japan (No.MB286) Printed in Japan...
Page 41 SCHEMATIC DIAGRAMS MICRO COMPONENT SYSTEM UX-P550 CD-ROM No.SML200407 Area suffix US ------------------------ Singapore UB ---------------------- Hong Kong UW ----------- Brazil,Mexico,Peru UX -------------------- Saudi Arabia UJ ---------------------- U.S.Military UN ----------------------------- Asean SP-UXP550 CA-UXP550 SP-UXP550 Contents Block diagram Standard schematic diagrams 2-11 to 15 Printed circuit boards No.MB286SCH...
Page 42 In regard with component parts appearing on the silk-screen printed side (parts side) of the PWB diagrams, the parts that are printed over with black such as the resistor ( ), diode ( ) and ICP ( ) or identified by the " " mark nearby are critical for safety.
Page 43: Block Diagram
Block diagram DVD servo / DVD system control section System control / Multiregulator / Video driver / Video out Primary section EXDAT0 to 15 component section LPF / PHYTHM AX section EXADT0 to 15 A,B,C,D,E,F,RF+,LPC1,LPC2 EXADR16 to 20 D1001 to D1004 LPCO1 NEXCE,NEXOE Y/CV-OUT...
Page 44 Standard schematic diagrams Primary with mains transformer section CN104 QGB2510J1-10 CN104 QGB2510J1-10 0.1/50 C1009 0.1/50 C1005 0.1/50 C1001 0.1/50 0.1/50 C1009 C1005 C1001 0.1/50 D1009 D1005 6A10E2 6A10E2 D1001 D1009 D1005 D1001 1N5401-TM 6A10E2 6A10E2 1N5401-TM 1N5401-TM 6A10E2 D1011 6A10E2 D1007 6A10E2 6A10E2...
Page 45 Audio output / External input / DVD motor section IC411 LA4628 IC421 LA4628 1000p C4217 C4117 C4204 C4104 2SC3576-JVC-T Q4221 R4221 2.2K 2SC3576-JVC-T C4109 C4209 Q4222 0.022 0.022 2.2K R4222 Q4121 C4231 C4232 2SC3576-JVC-T R4121 10/25 10/25 KTA1046/Y/ 2.2K KRA109M-T...
Page 46 Maltiregulator / LPF / PHYTHM AX section (SHEET 9) (SHEET 2) IC250 GP1FA553TZ CN220 J200 CN200 C2005 QGF1016F3-19 QNN0420-001 QGB2510J1-11 QQR0797-002 D2401 L2080 B2081 C2105 K2204 NRSA02J-0R0X D2411 K2202 NRSA02J-0R0X K2206 NRSA02J-0R0X 1N4003S-T5 D2404 IC241 IC240 PQ05RD21 KIA7810API B2082 B2083 W200 KTA1046/Y/ KTC1027/OY/-T...
Page 47 Source selector switch / LCD display / System control / Users key control section (SHEET 7) (SHEET 7) QNS0089-001 S700 QNS0089-001 CN700 CN702 CN701 QSW0454-001 J700 QGF1205C1-11 QGF1205F1-09 QGF1205F1-10 2SA1037AK/RS/-X W710 Q7360 D7330 MTZJ6.2C-T2 QLD0312-001 DI750 2SC2412K/R/-X Q7340 Q7361 SEG30 SEG32 SEG31 SEG27...
Page 48 Video driver / Video out component section QNN0601-001 JA301 R3006 IC301 B3017 QUY150-050Y MM1623XF-X L3001 R3007 C3031 0.01/16 MUTE1 R3008 Y/C-MIX R3021 1/6.3 C3010 R3022 JA302 QNN0434-001 R3023 C3020 22/16 C3007 R3024 R3009 C3014 470/6.3 VIDEO-LPF C3021 470/6.3 R3025 1/6.3 C3011 R3010 470/6.3...
Page 49 Microphone amplifier / Echo section R6017 1.5K C6016 0.01 C6015 R6015 100/10 QQR0162-001Z R6011 R6021 R6016 C6008 K6003 K6002 0.22/50 C6007 QQR0162-001Z 3.3/50 C6012 HA17558AF-X 100P IC601 R6012 R6003 C6003 R6029 1/50 560K C6018 C6023 7.5K 22/50 2.2/50 C6002 R6002 C6020 R6009 R6030...
Page 50 FW100 MSI-5U2LWA R371 R108 RECL R106 R302 R110 2.2K Q342 QGF1205F1-09 KRA111M-T C104 VR37 C102 QVP0077-103Z 0.01 220p Q343 R306 2SC3576-JVC-T 4.7K R336 R344 Q344 C340 2SC3576-JVC-T 47/50V CN32 4.7K QGF1205F1-09 R339 C341 Q345 100K R345 C304 1/50V 2SC3576-JVC-T 10/16V R304 4.7K...
Page 51 DVD servo / DVD system control section (1/2) (SHEET 9) D3.3V IC302 D3.3V LM1117MP-ADJ-X P3.3V C373 C374 C372 C375 C376 P3.3V R310 0.47 D1.2V C306 0.1/16 R311 0.1/16 C359 DGND MDQ9 EXDAT8 MDQ5 DGND MDQ10 TP325 CN101 S3.3V MDQ4 C101 QGF0523F1-24W TP324 0.1/16...
Page 52 DVD servo / DVD system control section (2/2) R716 PCMCLK R719 IC704 IC705 R717 R720 (SHEET 8) S3.3V D3.3V P3.3V C712 C714 R701 R702 K4S641632F-TC75 IC505 22/6.3 DGND C553 IC701 C551 AK4384VT-X 0.1/16 MDQ0 MDQ15 R710 C558 MDQ1 0.1/16 MDQ14 R711 MDQ2 MDQ13...
Page 53: Printed Circuit Boards
Printed circuit boards Main board Video board (Main board) (Video board) R7183 CN700 R7083 R7340 PP300 R7330 R7341 D7353 R7178 CN711 C7103 JA302 CN300 C7360 D3002 R7202 R7102 R7203 R7103 R2012 R2112 R7177 C3022 R7282 D3001 CN701 X7360 R7204 R7104 K7340 R7173 CN702...
Page 54 Power board (Power amplifier board) (Power supply board) C4218 C4217 C4118 C4117 R4234 IC421 IC411 C4105 C4205 C4103 R4233 C4204 R4106 R4232 R4231 C4213 R4105 C4232 C4214 C4231 C4108 Q4231 Q4232 C4212 R4204 R4108 R4202 R4103 C4112 C4209 Q4233 C4211 Q4234 C4111 R4203...
Page 55 DVD loading switch board DVD servo board (1/2) Forward side CN501 TP54 TP56 TP701 TP57 TP702 TP58 TP704 C910 TP59 TP706 TP60 TP703 TP61 R704 R254 R205 C253 R501 TP331 R207 C206 C208 IC201 TP326 TP330 R208 R204 TP705 TP62 R746 C258 IC702...
Page 56 DVD servo board (2/2) Reverse side R381 R309 R320 C310 C377 IC301 C327 C307 C378 C306 C372 R395 R371 R374 R308 R375 R376 R377 C374 R313 C375 C350 C348 C102 C359 C391 C315 C317 C311 C110 C340 R124 C379 R333 C314 C347 R359...
Page 57 Cassette switch board VR37 R371 FW100 Head amplifier board CN33 C374 PP300 R310 CN34 R105 R313 CN32 R342 C105 C107 C205 Q302 R372 Q375 C310 Q376 R205 Q372 R338 C314 C371 C313 R376 R375 R337 R335 L301 R305 C331 R353 C300 C304 R327...
Page 58 Victor Company of Japan, Limited AV & MULTIMEDIA COMPANY AUDIO/VIDEO SYSTEMS CATEGORY 10-1,1chome,Ohwatari-machi,Maebashi-city,371-8543,Japan Printed in Japan (No.MB286SCH)
Page 59: Parts List
PARTS LIST [ UX-P550 ] * All printed circuit boards and its assemblies are not available as service parts. Area suffix US ---------------------- Singapore UB --------------------- Hong Kong UW ---------- Brazil,Mexico,Peru UX ------------------- Saudi Arabia UJ --------------------- U.S.Military UN ----------------------------Asean...
Page 60 Exploded view of general assembly and parts list Block No. Echo board F1003 F1006 H1003 Mic amp. board Power amplifier bo FL board D7500 DI750 D7601 Switch board D7600 Headphone jack board...
Page 61 Power supply board F1003 F1006 H1003 F1002 F1001 F1005 F1004 Power amplifier board H4001 Ver.UB Only Video board HS240 HS241 Main board...
Page 62 General Assembly Block No. [M][1][M][M] Symbol No. Part No. Part Name Description Local  GV10189-016A FRONT PANEL GV30569-005A FRONT LENS GV40470-001A STANDBY LENS GV40471-001A REMOTE LENS GV20265-009A MAIN BUTTON GV40472-004A EJECT BUTTON GV30555-003A VOL PLATE GV40473-002A LCD LENS GV30557-001A LCD HOLDER GV40478-004A LED LENS QYSBSF2608Z...
Page 63  Symbol No. Part No. Part Name Description Local QYSBSGY3008E TAP SCREW M3 x 8mm(x2) QYSBSGY3008E TAP SCREW M3 x 8mm QYSBSGY3008E TAP SCREW M3 x 8mm QYSBSGY3008E TAP SCREW M3 x 8mm QYSBSGY3008E TAP SCREW M3 x 8mm GV20288-005A TOP COVER ASSY GV40506-001A DOOR SPRING...
Page 64 DVD mechanism assembly and parts list Block No. FTU-DE2-11M Grease =JVG-31N =CFD-4007ZY2 =PG-641 =1401C < Back side > ± 63.3mm 0.1mm ± 10.5mm 0.1mm...
Page 65 DVD mechanism Block No. [M][J][M][M] Symbol No. Part No. Part Name Description Local  LE20725-001A MECHA BASE LE20699-002A SPINDLE BASE QYSDST2605M TAP SCREW M2.6 x 5mm(x2) LE40931-001A SHAFT LV33991-001A ADJUST SPRING QYSPSFU2040M TAP SCREW M2 x 4mm LE20698-004A FEED HOLDER QAR0215-001 FEED MOTOR LV41510-201A...
Page 66 DVD loading base assembly and parts list Block No. FMU-DE2-11M Grease JVG-31N JVS-1003 (All circumference) Backside Switch Board The parts without symbol number are not service.
Page 67 DVD loading base Block No. [M][N][M][M] Symbol No. Part No. Part Name Description Local  LE10275-006A LOADING BASE LE31043-001A PULLEY GEAR LE31042-001A MIDDLE GEAR LE31044-001A IDLE GEAR LE20665-001A SLIDE CAM LE20666-003A ELEVATOR LE10276-002A TRAY LE31045-001A BUSHING LE40898-001A SHAFT QYSSSF2008Z TAP SCREW M2 x 8mm QYSDSF2008Z TAP SCREW...
Page 68 Cassette mechanism assembly and parts list Block No. SLC-S302M Grease = EM-30L =UD-24 =LEN-320M =MOBIL-1 The lower side Switch board Head amplifier board 3-10...
Page 69 Cassette mechanism Block No. [M][P][M][M] Symbol No. Part No. Part Name Description Local  VKS1165-00N CHASSIS B. ASSY VKS2274-002 REEL GEAR (x2) VKW5286-002 B.T. SPRING (x2) VKS5559-001 PLAY IDLE GEAR VKS5595-002 BLIND VKS5560-003 FR IDLE GEAR LV42013-001A EARTH SPRING SLC-RP4SVM HEAD MOUNT ASSY VKY3149-002 CASSETTE SP.
Page 70: Electrical Parts List
Electrical parts list Main board  Symbol No. Part No. Part Name Description Local Block No. [0][1] C2002 QETN1HM-475Z E CAPACITOR 4.7uF 50V M  Symbol No. Part No. Part Name Description Local C2003 QTE1H28-106Z E CAPACITOR 10uF 50V C2004 QETN1HM-475Z E CAPACITOR 4.7uF 50V M...
Page 71  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local C2231 QETN1HM-474Z E CAPACITOR 0.47uF 50V M R2071 NRSA63J-103X MG RESISTOR 10kΩ 1/16W J C2232 QETN1HM-475Z E CAPACITOR 4.7uF 50V M R2072 NRSA63J-220X MG RESISTOR 22Ω...
Page 72  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local R7060 NRSA63J-393X MG RESISTOR 39kΩ 1/16W J R7239 QRE141J-103Y C RESISTOR 10kΩ 1/4W J R7061 NRSA63J-472X MG RESISTOR 4.7kΩ 1/16W J R7240 QRE141J-103Y C RESISTOR 10kΩ...
Page 73: Video Board
 Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local K7375 NRSA02J-0R0X MG RESISTOR 0Ω 1/10W J PP12 QZW0038-001 WIRE CLAMP R3006 NRSA63J-750X MG RESISTOR 75Ω 1/16W J S700 QSW0454-001 R3007 NRSA63J-750X MG RESISTOR 75Ω...
Page 74 C4107 QETN1CM-336Z E CAPACITOR 33uF 16V M Q1003 2SD1266/P/ TRANSISTOR ,US,U W,UX C4108 QTE1V06-106Z E CAPACITOR 10uF 35V Q4121 2SC3576-JVC-T TRANSISTOR C4109 QFLC1HJ-223Z M CAPACITOR 0.022uF 50V J Q4122 2SC3576-JVC-T TRANSISTOR C4110 QETN1HM-474Z E CAPACITOR 0.47uF 50V M Q4123 KRA102M-T...
Page 75  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local R4203 QRE141J-2R2Y C RESISTOR 2.2Ω 1/4W J Z1002 QNG0003-001Z FUSE CLIP R4204 QRE141J-2R2Y C RESISTOR 2.2Ω 1/4W J UJ,UN Z1003 QNG0003-001Z FUSE CLIP ,US,U R4205 QRE141J-2R2Y...
Page 76  Symbol No. Part No. Part Name Description Local  Symbol No. Part No. Part Name Description Local C261 NCB31EK-223X C CAPACITOR 0.022uF 25V K R111 NRSA63J-243X MG RESISTOR 24kΩ 1/16W J C262 NCB31EK-223X C CAPACITOR 0.022uF 25V K R112 NRSA63J-303X MG RESISTOR 30kΩ...
Page 77 TRANSISTOR R701 NRSA63J-1R0X MG RESISTOR 1Ω 1/16W J Q342 KRA111M-T DIGI TRANSISTOR R702 NRSA63J-0R0X MG RESISTOR 0Ω 1/16W J Q343 2SC3576-JVC-T TRANSISTOR R710 NRSA63J-100X MG RESISTOR 10Ω 1/16W J Q344 2SC3576-JVC-T TRANSISTOR R711 NRSA63J-221X MG RESISTOR 220Ω 1/16W J Q345...
Page 78  Symbol No. Part No. Part Name Description Local R105 QRE141J-104Y C RESISTOR 100kΩ 1/4W J R106 QRE141J-113Y C RESISTOR 11kΩ 1/4W J R107 QRE141J-912Y C RESISTOR 9.1kΩ 1/4W J R108 QRE141J-273Y C RESISTOR 27kΩ 1/4W J R110 QRE141J-103Y C RESISTOR 10kΩ...
Page 79 <MEMO> 3-21...
Page 80: Packing Materials And Accessories Parts List
Packing materials and accessories parts list Block No. Speaker x2 A1, A2, A3, A4, A5, A6, A7, A11, A12 3-22...
Page 81 Packing and Accessories Block No. [M][3][M][M] Symbol No. Part No. Part Name Description Local  QAL0014-001 AM LOOP ANT QAL0457-001 ANT.WIRE GVT0130-013A INST BOOK ENG CHI(PEKIN) GVT0130-015A INST BOOK GVT0130-008A INST BOOK ENG CHI(PEKIN) UN,US GVT0130-002A INST BOOK ENG SPA POR GVT0130-009A INST BOOK ENG ARA PER...

This manual is also suitable for:

Sp-uxp550 Ca-uxp550

JVC UX-P550 Service Manual

Quick Links

TABLE OF CONTENTS

Related Manuals for JVC UX-P550

Summary of Contents for JVC UX-P550

This manual is also suitable for:

Table of Contents