JVC UX-P30 Series Service Manual page 11

3.1.5 Remove the rear panel
(See Fig.8 to 10)
• Prior to performing the following procedure, remove the metal
cover, rear cover and the CD mechanism assembly.
(1) Remove the five screws G attaching the rear panel.
(2) Disconnect the card wire from
(3) Disengage the lower two joints b on each side of the rear
panel using a screwdriver and remove the rear panel
backward (The tuner board and the fan will be also
detached.Remove them as needed).
CN902 on the main board.
Joint b
Rear panel
Fig.9
Joint b
Rear panel
Fig.10
(No.MB049)1-11