Inserting The Tool Bits; Turning On And Off; Rotating Direction; Changing The Handle Positions - Westfalia 82 72 97 Instruction Manual

Hint: If the LED does not light up the battery is dam-
aged.

Inserting the Tool Bits

Tool bits can either be directly inserted into the hexago-
nal chuck (1) of the screwdriver or into a bit holder.

Turning ON and OFF

Press the ON/OFF trigger (4) to turn on the screw-
1.
driver.
Release the trigger in order to stop the screwdriver.
2.

Rotating Direction

Press the rotating direction button to set clockwise or
3.
counter clockwise running of the motor.
The rotating direction button can only be pressed,
4.
while the ON/OFF trigger is released.
In the middle position the ON/OFF trigger is locked.
Changing the Handle Position
The screwdriver is delivered in the pistol grip configura-
tion.
1. To transform it to a straight configuration, depress
the locking button PRESS (7) and turn the rear part
of the housing clockwise by 180°.
2. The locking button snaps automatically and locks the
housing into place. To change back to the pistol grip
configuration, depress the locking button (7) to un-
Using
16