Beem Latte Creme Instruction Manual page 47

Pick up the milk container (1) from the base plate (6) using
‹
the handle (2).
Pour the froth into a cup or use a spoon to remove it from the
‹
milk container.
NOTE
Before you begin frothing milk again, you must allow the de-
►
vice too cool down. The device cannot be switched on again
until it has cooled down sufficiently.
Rinse the milk container (1) with cold water after each
►
frothing process to accelerate cooling down.
Switching off
NOTE
The device
►
The device switches itself off automatically only after frothing
►
or when the required milk temperature has been reached.
Pull the mains plug out of the mains socket if you acciden-
►
tally switch on the device and remove the milk container (1)
from the base plate (6).
Pull the plug out of the mains socket after the device has
‹
automatically switched itself off.
BEEM - Elements of Lifestyle
cannot be switched off via the ON switch (3).
Operation and use
EN
47