Operating Elements - Beem Latte Creme Instruction Manual

Design and function

Operating elements

EN
42
ON switch
To switch on the device, proceed as follows:
Push the ON switch (3) briefly so that the control light goes
‹
on.
NOTE
Do not press the
►
been switched on.
cannot be switched off via the ON switch (3); it
The device
►
switches itself off automatically.
3
NOTE
If the ON switch (3) was already pressed before connec-
►
tion of the device, the device will be switched on when the
mains cable (7) is inserted into the mains socket.
The device switches itself off automatically only after frothing
►
or when the required milk temperature has been reached.
ON switch (3) again after the device has
BEEM - Elements of Lifestyle