Preparing; Inserting/Removing The Frother; Placing The Milk Container Onto The Base Plate - Beem Latte Creme Instruction Manual

Preparing

Inserting/removing the frother

WARNING
Danger of injury by accidentally switching on the device.
Switching on the the device accidentally can cause burns.
Do not insert the plug into the mains socket yet.
►
Do not place the milk container (1) onto the the base plate
►
(6) yet.
Put the frother (4) on the holding pin (8) on the bottom of the
‹
milk container (1) and push it with minimal force until it snaps
in with a "click".
Pull the frother (4) carefully with minimal force from the hol-
‹
ding pin (8) of the milk container (1).
4

Placing the milk container onto the base plate

Place the milk container (1) onto the middle of the base plate
‹
(6). This makes an electrical contact between the milk contai-
ner (1) and the base plate (6).
Insert the mains plug of the connecting cable (7) into the
‹
mains socket.
BEEM - Elements of Lifestyle
8
Inserting
4
8
Removing
Preparing
EN
43