Unpacking The Manual Injector - Agilent Technologies 1200 Series Reference Manual

1 Installing the Manual Injector

Unpacking the Manual Injector

Damaged Packaging
Upon receipt of your manual injector, inspect the shipping containers for any
signs of damage. If the containers or cushioning material are damaged, save
them until the contents have been checked for completeness and the manual
injector has been mechanically checked. If the shipping container or
cushioning material is damaged, notify the carrier and save the shipping
material for the carriers inspection.
If there are signs of damage to the manual injector, please do not attempt to install the
C A U T I O N
manual injector.
Delivery Checklist
Ensure all parts and materials have been delivered with the manual injector.
The delivery checklist is shown in
please see
parts to your local Agilent Technologies sales and service office.
Table 1
Description
Manual injection valve with start cable, including:
operating instructions, needle port cleaner, vent tubes
(×2) and fittings, 5/64 and 9/64-inch hex keys
Mounting pole
Connection capillary, 0.17 mm id, 500 mm
Base plate
Organizer plate
Catch tube cap
8
"Parts and Materials"
Manual Injector Checklist
Table 1. To aid in parts identification,
on page 29. Please report missing or damaged
Quantity
1
1
1
1
1
1
1200 Series MI Reference Manual
Part Number
5063-6502
5001-3738
G1328-87600
G1328-44111
5042-8553
5042-8576