Specifications - pronovost P-982TRC-150 Operator's & Parts Manual

SPECIFICATIONS

Model
Horse power required
Approximative performance
Height including telescopic chute
Frame height
Lateral blades height
Working width
Impeller diameter
Depth of drum
Impeller blades
Shear bolt
Size of impeller shaft
P.T.O. speed required
Reducer
Impeller speed
Number of augers
Auger ball bearing
Drive chain
Replaceable scraper blade
Adjustable skid shoes
Drum rotation
Chute rotation
P.T.O. shaft
3-point hitch
Frame
Weight
9
Design and specifications subject to change without notice.
Optional: full flight spiked augers with welded carbon steel teeth
Sides
Back
Drum
P-982TRC-200
100 to 150 CV
800 tons imp. / hour
with 125 HP tractor
149" extended / 123" retracted
Standard: 6 not replaceable 3/8" carbon steel blades
Optional: 6 replaceable 3/8" carbon steel blades
1 for the impeller + 1 for the auger drive
540 RPM without reducer
1000 RPM with reducer
Optional (150 HP at 1000 RPM)
1000/540 RPM (1.86 to 1 ratio)
540 RPM
2 x 20" full flight spiked augers
2" (with ductile flange)
No. 100HD in oil bath
6½" x 1/2" carbon steel sharpened
Carbon steel
Hydraulic motor and cushion valve included
Hydraulic motor and cushion valve included
No. 9 (V90)
Yoke 1 3/8"-6 splines for tractor output 540 RPM
Yoke 1 3/8"-21 splines for tractor output 1000 RPM
Yoke 1 3/4"-20 splines for tractor output 1000 RPM
Category 2
9 gages
Carbon steel 1/4"
3700 lbs (with telescopic chute)
- 16 -
48"
65"
98"
30"
15"
2"
5/16"