Garbin TZ S Use And Maintenance Instructions page 59

TRENCHER
MAINTENANCE SHEET
N° 10
AFTER THE FIRST 50 HOURS OF WORK
1) Remove the LH safety guard pos.1 (see Fig.3 pos. 15);
2) Check the belts (Ref.2) and chain (Ref.3) for wear;
3) Replace with original spare parts if necessary;
4) Check belt tightness. (Ref.2);
5) Check belt tightness. (Ref.3);
6) Record the operation on registration sheet N°10.
Use and maintenance instructions – Spare parts
Rev. 01.2013 - EN (translation of the original instructions)
WORK POINT
TYPE OF OPERATION
LH SIDE
CHECK THE TRANSMISSION BELT – CHAIN
VISUAL INSPECTION FOR WEAR AND
TIGHTNESS
59
T E Z A
TZ S
Via L.da Vinci,32/B
36034 Malo (VI) Italy