Garbin TZ S Use And Maintenance Instructions page 57

TRENCHER
MAINTENANCE SHEET
N° 09
AFTER THE FIRST 50 HOURS OF WORK
1) Check the tools (Ref.1) and seats (Ref.2) for wear;
2) If necessary, replace the tools with original spares;
3) Lubricate the needles, seats and moving chain parts with diesel oil (Ref.1-2-3);
4) Check the screw for wear (Ref.4);
5) Record the operation on registration sheet N°09.
REF. 1
REF. 2
Use and maintenance instructions – Spare parts
Rev. 01.2013 - EN (translation of the original instructions)
WORK POINT
TYPE OF OPERATION
REF. 3
CHECK THE CHAIN, TOOLHOLDER AND
SCREW FOR WEAR
VISUAL INSPECTION FOR WEAR AND
LUBRICATION
REF. 4
57
T E Z A
TZ S
Via L.da Vinci,32/B
36034 Malo (VI) Italy