Garbin TZ S Use And Maintenance Instructions page 19

TRENCHER
Studded drive tyres with inner tube
Support tyres with inner tube
Length of chain:
Main shaft pin and lead pinion
Number of digging tools
Operating weight with 45 cm trench jib and fuel tank
full
For dimensions see
Trench depth
Trench width
Safety device for stopping the engine by releasing the red lever on the handlebar (normally-open micro
Sound power
Equivalent sound pressure at operator station
•
Engine idling
•
Engine at max. revs and chain
Vibrations transmitted to operator station with engine idling
•
Left hand
•
Right hand
Vibrations transmitted to operator station with engine at max.
revs and chain turning
•
Left hand
•
Right hand
Use and maintenance instructions – Spare parts
Rev. 01.2013 - EN (translation of the original instructions)
CHAIN TRENCH ASSEMBLY
Trench chain with tool holder bars
Tool type: slotted and/or needle with tip in tungsten carbide
Mechanical chain tension adjuster
WEIGHTS AND DIMENSIONS
PERFORMANCE
SAFETY DEVICES
Safety bar for chain
configuration)
NOISE AND VIBRATIONS
Data collected from no-load tests
TAB. 2 (Technical data)
TYRES
"TRACTOR" 16x6.50-8 4PR
Slots:
Needles:
Mixed:
Lw(A)
Leq(A)
A(8)
A(8)
19
15.600x6"PR RIG
standard 32 pins
Z 4
standard 16 tools
133 kg
FIG. 5
standard 45 cm
11 - 13 cm
10 - 12 cm
11 - 13 cm
102 [dB(A]
74.0 [dB(A]
88.4 [dB(A]
3.45 [m/s²]
2.39 [m/s²]
14.49 [m/s²]
24.66 [m/s²]
Via L.da Vinci,32/B
36034 Malo (VI) Italy
T E Z A
TZ S