Daily Timer; To Deactivate Or Re-Activate A Daily Timer; Dab Radio Operation; Auto Scan - JVC UX-D750 Instruction Manual

Daily Timer

You can use the setting timer to make the unit automatically turn on at a certain time
everyday from standby. When the setting timer is on, the timer indicator "
displayed. The clock must be correctly set for the timer to operate correctly.
1. In Standby mode, press and hold TIMER/SLEEP until "TIMER SET" scrolls across the
display. Then the system will switch to the last selected source.
2. Press
3. Press TIMER/SLEEP, the hour indicator will blink.
4. Press
5. Press TIMER/SLEEP, the minute indicator will blink.
6. Press
7. Press TIMER/SLEEP, the volume indicator will flash.
8. Press
9. Press TIMER/SLEEP to confirm. The display will show "
• To exit timer setting mode without storing, press the
• If no button is pressed in 90 seconds, the unit exits clock setting mode automatically.
• If DISC / USB source is selected and the audio cannot be played, FM is activated automatically.

To Deactivate or Re-activate a Daily Timer

In Standby mode, repeatedly press TIMER/SLEEP on the remote control to activate or
deactivate the timer.

DAB Radio Operation

Turn the SOURCE dial on the unit or press FM/DAB repeatedly on the remote control to
select DAB source. The word "DAB" will be showed on the display.
1. If the unit is connected to the mains power and then switched on to DAB mode for the
first time, the unit will automatically start scanning. The display will show "SCANNING".
2. All the stations that have been found will be stored automatically. Press
unit or
3. To re-tune, press the SCAN button on the remote control to perform a quick scan again.

Auto Scan

The auto scan will search for the entire DAB Band III channels. After the scan has finished,
the first alphanumerically found station will be automatically selected.
1. Press SCAN button to activate automatic program mode. The display will show
"SCANNING" that indicates the progress of the scan.
2. Once the scan has finished, the unit will display the total number of stations have been
found. All stations that have been found will be automatically stored.
20
/ button to select a source (DISC / USB / FM / DAB).
/ button to set the hour.
/
button to set the minute.
/
button to adjust the alarm volume.
/ on the remote control to explore the found stations.
".
button.
" will be
/
on the