Table of Contents
Advertisement
CALLER ID
The handset allows you to view the caller's phone number before you accept a phone
call. The time and date of the call are saved to the internal memory. (If your local phone
service provides Caller ID with Name, the caller's name will be displayed instead of the
number.)
Important: To activate this function, contact your local phone service provider for the
Caller ID service.
Information Displayed during an Incoming Call
For each incoming call, the caller's name and/or telephone number will be displayed
after the first ring.
If the caller's name cannot be identified, the number will be displayed.
If the caller's information could not be obtained, the LCD display will be blank. Only the
ring tone will sound, and the call will not be saved to the internal memory.
Viewing the Incoming Call List
1. Press right key
2. Press up /down
3. Press right key
viewed will be displayed first. If there are no entries, Empty will be displayed.
4. Press up /down
5. Press left key
exit.
Calling from the Incoming Call List
1. Press right key
2. Press up /down
3. Press right key
4. Press up /down
5. When the contact information is displayed, press call key . or Press left key
repeatedly to return to the standby mode.
The internal memory stores 30 incoming calls and 30 outgoing calls.
to enter the menu.
key to select In Call.
to view the incoming call list. New entries that have not been
key to view the caller information.
repeatedly to return to the standby mode, or press end key
to enter the menu.
key to select In Call.
to view the incoming call.
key to find the caller you wish to call.
31
to
Advertisement
Chapters
Table of Contents
