Accepting The Limitations On Use; Available Apps - Raymarine Lighthouse Sport 3.10 Series Advanced Operation Instructions

Accepting the Limitations on Use

After your display has powered up the Homescreen is displayed.
1. Before using the display you must accept the Limitations on Use (LoU) disclaimer. To view the full
LoU Disclaimer, use the Left button to highlight the text and press the OK button.
The LoU acknowledgment is displayed each time the display is powered on. The full LoU text can
be accessed at any time, it is located at the bottom of the Getting started menu: Homescreen >
Settings > Getting started .

Available apps

Apps are used in App pages. Each app page is represented on the Homescreen by an app page icon.
Each app page can include up to 4 apps. The individual apps available are:
Chart — The Chart app displays electronic cartographic information from your
Chart cards and when used in conjunction with a GNSS (GPS) receiver, plots
your vessel's position. The Chart app can be used to: mark specific locations
using Waypoints; build and navigate Routes; or, keep a record of where you
have been by recording a Track.
For detailed information about the Chart app refer to:
Fishfinder — The Fishfinder app uses a connected transducer to help you find
fish by creating an underwater view of bottom structure and targets in the
water column that is covered by your transducer.
Note:
• The channels available in the Fishfinder app are determined by the display
• The icon used on the homescreen will reflect the fishfinder channel in use.
For detailed information about the Fishfinder app refer to:
p.101 — Fishfinder app
Dashboard — The Dashboard app provides data readings from connected
sensors and equipment.
Note:
The Dashboard app is only available in splitscreen app pages.
For detailed information about the Dashboard app refer to:
p.117 — Dashboard app
Radar — The Radar app is a situational awareness aid that displays a graphical
representation of your surroundings in relation to your vessel using the
echo/target returns from a connected Quantum radar scanner. The Radar app
allows you to track targets and measure distances and bearings
Note:
The Radar app is included in homescreen app page icons when the Radar
installed option is enabled in the initial start up wizard, otherwise and must
be added manually.
For detailed information about the Radar app refer to:
Homescreen
variant and connected transducer.
p.73 — Chart app
p.129 — Radar app
45