Radar App Context Menu; Radar Modes - Raymarine Lighthouse Sport 3.10 Series Advanced Operation Instructions

• Pressing the Plus or Minus buttons will range in and range out respectively, centered around
your vessel .
Cursor mode
In cursor mode the cursor can be used to select objects onscreen.
Controls behavior:
• Pressing the OK button opens the context menu for the area or object directly under the cursor's
position.
• Pressing any button on the Directional pad moves the cursor in the respective direction.
• Pressing the Waypoint button will place a waypoint at your vessel's current location.
• Pressing the Plus or Minus buttons will range in and range out respectively.
• Pressing the Back button will switch back to Motion mode.
Note:
Waypoints are not shown in the Radar app.

Radar app context menu

The Radar context menu provides context sensitive data and menu options.

10.4 Radar modes

The Radar app provides preset modes that can be used to quickly achieve the best picture
depending on your current situation. Only Radar modes supported by your Radar scanner are shown.
To change radar mode select the required mode from the Radar app menu.
HARBOR
Harbor mode takes into account land clutter that is typically encountered in
a Harbor, so that smaller targets are still visible. This mode is useful when
navigating in a Harbor.
COASTAL
Coastal mode takes into account slightly higher levels of Sea clutter that are
encountered out of Harbor areas. This mode is useful when in open water
but keeping to coastal areas.
OFFSHORE
Offshore mode takes into account high levels of Sea clutter so that targets are
still visible, useful when navigating in open water away from the coast.
WEATHER
Weather mode optimizes the display to help identify precipitation, useful for
helping determine weather fronts.
Radar app
• The Radar context menu is accessed by highlighting a
location or object onscreen and pressing the OK button.
• The context menu provides Latitude, longitude, range
and bearing details for the selected location or object
in relation to your vessel's position.
• The context menu provides access to the VRM/EBL
marker control
135