Fishfinder Settings Menu - Raymarine Lighthouse Sport 3.10 Series Advanced Operation Instructions

1. Select Transducer from the Fishfinder app's Settings menu: Menu > Settings > Transducer
2. If your installation required you to install an all-in-one transducer backwards (e.g.: this may
occur when connecting the transducer to a trolling motor), then select Backwards from the HV
transducer alignment option. This ensures that the port and starboard channels appear correctly
orientated onscreen, otherwise keep the default setting: Forwards.
3. Select where you want your depth measurements taken from:
i. Below transducer (default) — No offset required
ii. Below keel — Enter the distance between the transducer face and the bottom of the keel.
iii. Below waterline —Enter the distance between the bottom of your keel and the waterline.
4. You can configure temperature settings as follows:
i. Enable or disable temperature readings as required.
ii. If enabled, check the temperature reading against the actual water temperature.
iii. If the current reading requires adjustment, select Calibrate temp and enter the difference
between your 2 readings.
8.6 Fishfinder settings menu
The table below details the settings available in the Fishfinder app.
Note:
The availability of some fishfinder settings are dependent on the fishfinder channel being viewed.
Sonar display tab (RealVision™ 3D channel)
Menu item and description
Boat icon
Choose which boat icon to use.
Target colors
Changes the color palette used for target returns.
110
Options
List of available boat icons.
• Rainbow (default)
• Burnt Yellow
• Cool Blue
• Lime Green
• Ruby Red